800.275.3924
info@oldbridgechem.com
Mn-Fr (9.00 am - 5.00 pm ET)
Old Bridge Chemicals


North America’s Largest Manufacturer of Copper and Zinc Compounds
Established 1962

Acidified Copper Sulfate

Acidified Copper Sulfate

Old Bridge Chemicals’ Acidified Copper Sulfate has been specifically formulated for use in the dairy industry. The product offers benefits over more traditional footbaths based on tetracycline, formaldehyde, copper sulfate or other chemicals. The lower pH of Acidified Copper Sulfate insures that more copper goes into solution, reducing your costs and providing a more efficient operation. The product is especially efficient in areas with hard water.

Product Sheet

Manufacturer: 
Old Bridge Chemicals, Inc.
554 Waterworks Rd.
Old Bridge, New Jersey 08857

Typical Properties

Common Name: Acidified Copper Sulfate

 

Copper Sulfate Pentahydrate: 80-85%
Citric Acid: 15-20%
Lead: 25 ppm
Iron: 200 ppm
Cadmium: 3 ppm maximum
Arsenic: 2 ppm maximum
Antimony: 3 ppm maximum

Notes:
ppm – parts per million

Storage

Acidified Copper Sulfate should be stored in a cool, dry place. Avoid storing in damp or wet areas.

Safe Handling

The product is acidic and causes severe eye irritation. It may be irritating to the skin and may cause sensitization reactions in certain individuals. Avoid breathing the dust as it may be irritating to the upper respiratory tract. Contact with eyes and skin should be avoided through the use of safety goggles and rubber gloves. In case of eye contact, immediately flush eyes with plenty of water for 15 minutes and call a physician. If Copper Sulfate is ingested, give large amounts of milk or water. Call a physician. Contaminated clothing should be thoroughly washed before reuse. Refer to Old Bridge Material Safety Data Sheet entitled “Acidified Copper Sulfate.”

Environmental Hazards

Copper Sulfate is toxic to fish and aquatic organisms. If the product is spilled, comply with Federal, State and local regulations on reporting spills. Refer to Old Bridge Chemicals’ Material Safety Sheet for further details.

Supply and Shipping

Acidified Copper Sulfate is manufactured at Old Bridge Chemical’ facilities located in Old Bridge, NJ, USA. The Product is packaged in 50 pound multi-wall bags.

Manufactured in the United States of America