Mn-Fr (9.00 am - 5.00 pm ET)
Old Bridge Chemicals

North America’s Largest Manufacturer of Copper and Zinc Compounds
Established 1962

Acidified Multi-Mineral Copper Sulfate

Product Data & Safety

Acidified Multi-Mineral Copper Sulfate

Old Bridge Chemicals’ Acidified Multi-Mineral Copper Sulfate has been specifically formulated for use in the dairy industry. The product offers benefits over more traditional footbaths based on tetracycline, formaldehyde, copper sulfate or other chemicals. The lower pH of Acidified Multi-Mineral Copper Sulfate insures that more copper goes into solution, reducing your costs and providing a more efficient operation. The product is especially efficient in areas with hard water.

Product Sheet

Old Bridge Chemicals, Inc.
554 Waterworks Rd.
Old Bridge, New Jersey 08857

Typical Properties

Common Name: Acidified Multi-Mineral Copper Sulfate


Copper Sulfate Pentahydrate: 70% (60 – 70%)
Citric Acid: 10%
Zinc Sulfate Monohydrate: 20% (10 – 30%)
Iron: 200 ppm
Cadmium: 3 ppm maximum
Arsenic: 2 ppm maximum
Antimony: 3 ppm maximum

ppm – parts per million


Multi-Mineral Copper Sulfate should be stored in a cool, dry place. Avoid storing in damp or wet areas.

Safe Handling

The product is acidic and causes severe eye irritation. It may be irritating to the skin and may cause sensitization reactions in certain individuals. Avoid breathing the dust as it may be irritating to the upper respiratory tract. Contact with eyes and skin should be avoided through the use of safety goggles and rubber gloves. In case of eye contact, immediately flush eyes with plenty of water for 15 minutes and call a physician. If Copper Sulfate is ingested, give large amounts of milk or water. Call a physician. Contaminated clothing should be thoroughly washed before reuse. Refer to Old Bridge Material Safety Data Sheet entitled “Multi-Mineral Copper Sulfate.”

Environmental Hazards

Copper Sulfate is toxic to fish and aquatic organisms. If the product is spilled, comply with Federal, State and local regulations on reporting spills. Refer to Old Bridge Chemicals’ Material Safety Sheet for further details.

Supply and Shipping

Multi-Mineral Copper Sulfate is manufactured at Old Bridge Chemical’ facilities located in Old Bridge, NJ, USA. The Product is packaged in 50 pound multi-wall bags.

Manufactured in the United States of America